Smart Grid – Public Utility Code – CA
Note bolded sections that refer to the smart grid system required to be safe and shall be implemented in a manner that does not compromise customer or worker safety.
The smart grid is not safe, nor is it secure. Therefore, CA state law is being broken.
8360. It is the policy of the state to modernize the state’s
electrical transmission and distribution system to maintain safe,
reliable, efficient, and secure electrical service, with
infrastructure that can meet future growth in demand and achieve all
of the following, which together characterize a smart grid:
(a) Increased use of cost-effective digital information and
control technology to improve reliability, security, and efficiency
of the electric grid.
(b) Dynamic optimization of grid operations and resources,
including appropriate consideration for asset management and
utilization of related grid operations and resources, with
cost-effective full cyber security.
(c) Deployment and integration of cost-effective distributed
resources and generation, including renewable resources.
(d) Development and incorporation of cost-effective demand
response, demand-side resources, and energy-efficient resources.
(e) Deployment of cost-effective smart technologies, including
real time, automated, interactive technologies that optimize the
physical operation of appliances and consumer devices for metering,
communications concerning grid operations and status, and
distribution automation.
(f) Integration of cost-effective smart appliances and consumer
devices.
(g) Deployment and integration of cost-effective advanced
electricity storage and peak-shaving technologies, including plug-in
electric and hybrid electric vehicles, and thermal-storage
air-conditioning.
(h) Provide consumers with timely information and control options.
(i) Develop standards for communication and interoperability of
appliances and equipment connected to the electric grid, including
the infrastructure serving the grid.
(j) Identification and lowering of unreasonable or unnecessary
barriers to adoption of smart grid technologies, practices, and
services.
electrical transmission and distribution system to maintain safe,
reliable, efficient, and secure electrical service, with
infrastructure that can meet future growth in demand and achieve all
of the following, which together characterize a smart grid:
(a) Increased use of cost-effective digital information and
control technology to improve reliability, security, and efficiency
of the electric grid.
(b) Dynamic optimization of grid operations and resources,
including appropriate consideration for asset management and
utilization of related grid operations and resources, with
cost-effective full cyber security.
(c) Deployment and integration of cost-effective distributed
resources and generation, including renewable resources.
(d) Development and incorporation of cost-effective demand
response, demand-side resources, and energy-efficient resources.
(e) Deployment of cost-effective smart technologies, including
real time, automated, interactive technologies that optimize the
physical operation of appliances and consumer devices for metering,
communications concerning grid operations and status, and
distribution automation.
(f) Integration of cost-effective smart appliances and consumer
devices.
(g) Deployment and integration of cost-effective advanced
electricity storage and peak-shaving technologies, including plug-in
electric and hybrid electric vehicles, and thermal-storage
air-conditioning.
(h) Provide consumers with timely information and control options.
(i) Develop standards for communication and interoperability of
appliances and equipment connected to the electric grid, including
the infrastructure serving the grid.
(j) Identification and lowering of unreasonable or unnecessary
barriers to adoption of smart grid technologies, practices, and
services.
8361. For purposes of this chapter, “ISO” means the Independent
System Operator operating pursuant to Article 3 (commencing with
Section 345) of Chapter 2.3 of Part 1 of Division 1.
System Operator operating pursuant to Article 3 (commencing with
Section 345) of Chapter 2.3 of Part 1 of Division 1.
8362. (a) By July 1, 2010, the commission, in consultation with the
Energy Commission, the ISO, and other key stakeholders shall
determine the requirements for a smart grid deployment plan
consistent with Section 8360 and federal law, including the
provisions of Title XIII (commencing with Section 1301) of the Energy
Independence and Security Act of 2007 (Public Law 110-140). The
commission shall institute a rulemaking or expand the scope of an
existing rulemaking to adopt standards and protocols to ensure
functionality and interoperability developed by public and private
entities, including, but not limited to, the National Institute of
Standards and Technology, Gridwise Architecture Council, the
International Electrical and Electronics Engineers, and the National
Electric Reliability Organization recognized by the Federal Energy
Regulatory Commission. An adopted smart grid deployment plan may
provide for deployment of cost-effective smart grid products,
technologies, and services by entities other than electrical
corporations. The smart grid technologies and services shall improve
overall efficiency, reliability, and cost-effectiveness of electrical
system operations, planning, and maintenance.
(b) This section does not require or authorize the commission to
delay action on an application by an electrical corporation that is
submitted prior to the commission determining the requirements for a
smart grid deployment plan.
Energy Commission, the ISO, and other key stakeholders shall
determine the requirements for a smart grid deployment plan
consistent with Section 8360 and federal law, including the
provisions of Title XIII (commencing with Section 1301) of the Energy
Independence and Security Act of 2007 (Public Law 110-140). The
commission shall institute a rulemaking or expand the scope of an
existing rulemaking to adopt standards and protocols to ensure
functionality and interoperability developed by public and private
entities, including, but not limited to, the National Institute of
Standards and Technology, Gridwise Architecture Council, the
International Electrical and Electronics Engineers, and the National
Electric Reliability Organization recognized by the Federal Energy
Regulatory Commission. An adopted smart grid deployment plan may
provide for deployment of cost-effective smart grid products,
technologies, and services by entities other than electrical
corporations. The smart grid technologies and services shall improve
overall efficiency, reliability, and cost-effectiveness of electrical
system operations, planning, and maintenance.
(b) This section does not require or authorize the commission to
delay action on an application by an electrical corporation that is
submitted prior to the commission determining the requirements for a
smart grid deployment plan.
8363. This chapter shall be implemented in a manner that does not
compromise customer or worker safety or the integrity or reliability
of the electrical transmission and distribution system in this state.
compromise customer or worker safety or the integrity or reliability
of the electrical transmission and distribution system in this state.
8364. (a) By July 1, 2011, each electrical corporation shall
develop and submit a smart grid deployment plan to the commission for
approval.
(b) This section does not require or authorize the commission to
delay action on an application by an electrical corporation that is
submitted prior to the commission’s approval of the electrical
corporation’s timely filed smart grid deployment plan.
develop and submit a smart grid deployment plan to the commission for
approval.
(b) This section does not require or authorize the commission to
delay action on an application by an electrical corporation that is
submitted prior to the commission’s approval of the electrical
corporation’s timely filed smart grid deployment plan.
8366. Smart grid technology may be deployed in a manner to maximize
the benefit and minimize the cost to ratepayers and to achieve the
benefits of smart grid technology. The commission, in consultation
with the Energy Commission, the ISO, and electrical corporations,
shall evaluate the impact of deployment on major initiatives and
policies including:
(a) Implementation of new advanced metering initiatives.
(b) Achievement of the renewables portfolio standard program
requirements and the need to operate the smart grid of the future
with a substantial increased percentage of electricity generated by
eligible renewable energy resources.
(c) Achievement of state goals for reducing emissions of
greenhouse gases as set forth in the California Global Warming
Solutions Act of 2006 and other state directives.
(d) Achievement of the energy efficiency and demand response goals
as required by Sections 454.5 and 454.55 and other state directives.
(e) Modernizing the aging utility grid infrastructure.
(f) Meeting the future energy growth needs of the state with new
and innovative technologies and methods that utilize the existing
assets more efficiently, result in a less environmentally adverse net
impact on the state, meet stringent costs versus benefit
assessments, and provide the ratepayers with new options in meeting
their individual energy needs.
(g) Implementation of technology to improve worker safety,
protection, and productivity.
the benefit and minimize the cost to ratepayers and to achieve the
benefits of smart grid technology. The commission, in consultation
with the Energy Commission, the ISO, and electrical corporations,
shall evaluate the impact of deployment on major initiatives and
policies including:
(a) Implementation of new advanced metering initiatives.
(b) Achievement of the renewables portfolio standard program
requirements and the need to operate the smart grid of the future
with a substantial increased percentage of electricity generated by
eligible renewable energy resources.
(c) Achievement of state goals for reducing emissions of
greenhouse gases as set forth in the California Global Warming
Solutions Act of 2006 and other state directives.
(d) Achievement of the energy efficiency and demand response goals
as required by Sections 454.5 and 454.55 and other state directives.
(e) Modernizing the aging utility grid infrastructure.
(f) Meeting the future energy growth needs of the state with new
and innovative technologies and methods that utilize the existing
assets more efficiently, result in a less environmentally adverse net
impact on the state, meet stringent costs versus benefit
assessments, and provide the ratepayers with new options in meeting
their individual energy needs.
(g) Implementation of technology to improve worker safety,
protection, and productivity.
8367. By January 1, 2011, and by January 1 of each year thereafter,
the commission shall report to the Governor and the Legislature on
the commission’s recommendations for a smart grid, the plans and
deployment of smart grid technologies by the state’s electrical
corporations, and the costs and benefits to ratepayers.
the commission shall report to the Governor and the Legislature on
the commission’s recommendations for a smart grid, the plans and
deployment of smart grid technologies by the state’s electrical
corporations, and the costs and benefits to ratepayers.
8368. The commission may modify or adjust the requirements of this
chapter for any electrical corporation with fewer than 100,000
service connections, as individual circumstances merit.
chapter for any electrical corporation with fewer than 100,000
service connections, as individual circumstances merit.
8369. Each local publicly owned electric utility with more than
100,000 service connections, shall, by July 1, 2011, develop a smart
grid deployment plan, that is consistent with federal law, including
the provisions of Title XIII (commencing with Section 1301) of the
Energy Independence and Security Act of 2007 (Public Law 110-140).
100,000 service connections, shall, by July 1, 2011, develop a smart
grid deployment plan, that is consistent with federal law, including
the provisions of Title XIII (commencing with Section 1301) of the
Energy Independence and Security Act of 2007 (Public Law 110-140).
Comments are closed.